How to connect 3 ip camera through a router to a pc? |
Здравствуйте, гость ( Вход | Регистрация )
How to connect 3 ip camera through a router to a pc? |
17.8.2017, 9:45
Сообщение
#1
|
|
Новенький Группа: Пользователи Сообщений: 22 Регистрация: 7.7.2017 Пользователь №: 106 456 Вставить ник Цитата |
I want to connect 3 IP cameras to a pc and capture their images in fair fps and process their image on pc by a program. I don’t need to capture the images from all of 3 cameras at the same time, just each time one of cameras as source is enough so I don’t use too much bandwidth. The supplier of camera suggests a router (as it shown in the below pictures and I prefer to use TP-LINK TL-R402M) and the camera has a built in server (for config and administration). The supported protocols on this cam are Onvif (port is 889) RTSP (port is 554)/ FTP/PPPoE/DHCP/DDNS/NTP/UPnP. Moreover, all type of IP cams support H.264/MJPEG on a stream through the IP. In the internet most of materials are about connecting various devices by routers and switchers but for wired IP cams there are not good sources of information. Can you please guide me what type of router this company means and is the mentioned router useful or I have to choose something else?
Thanks ! I didn't find the right solution from the internet. References: http://www.networking-forum.com/viewtopic....=46&t=46699 Clean Energy Video Examples |
|
|
| |
Политика конфиденциальности | Легкая версия |