Главная страница
Вход
Логин: Пароль:Забыли пароль?
Запомнить вас на этом компьютере?

Здравствуйте, гость ( Вход | Регистрация )

Скрыть объявления

Объявления

Форумы в Telegram - @vladforum С темами, всё как на форуме, только в Telegram!

 
Ответить в данную темуНачать новую тему
> How to connect 3 ip camera through a router to a pc?
davidcave
сообщение 17.8.2017, 9:45
Сообщение #1


Новенький

Группа: Пользователи 
Сообщений: 22
Регистрация: 7.7.2017
Пользователь №: 106 456
Вставить ник Цитата


I want to connect 3 IP cameras to a pc and capture their images in fair fps and process their image on pc by a program. I don’t need to capture the images from all of 3 cameras at the same time, just each time one of cameras as source is enough so I don’t use too much bandwidth. The supplier of camera suggests a router (as it shown in the below pictures and I prefer to use TP-LINK TL-R402M) and the camera has a built in server (for config and administration). The supported protocols on this cam are Onvif (port is 889) RTSP (port is 554)/ FTP/PPPoE/DHCP/DDNS/NTP/UPnP. Moreover, all type of IP cams support H.264/MJPEG on a stream through the IP. In the internet most of materials are about connecting various devices by routers and switchers but for wired IP cams there are not good sources of information. Can you please guide me what type of router this company means and is the mentioned router useful or I have to choose something else?
Thanks !

I didn't find the right solution from the internet.

References:

http://www.networking-forum.com/viewtopic....=46&t=46699

Clean Energy Video Examples
Перейти в начало страницы
 
+Цитировать сообщение

  Ответить в данную темуНачать новую тему
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 




RSS       Политика конфиденциальности
Легкая версия