Главная страница
Вход
Логин: Пароль:Забыли пароль?
Запомнить вас на этом компьютере?

Здравствуйте, гость ( Вход | Регистрация )

Скрыть объявления

Объявления

Форумы в Telegram - @vladforum С темами, всё как на форуме, только в Telegram!

> Не заходит в яндекс, Куда копать
ESD
сообщение 12.3.2018, 21:58
Сообщение #1


Погнали наши...

Возраст: 39
Группа: Пользователи 
Сообщений: 1 055
Регистрация: 10.9.2012
Из: владимир city/dobroe
Пользователь №: 86 005
Вставить ник Цитата


Интернет ТТК.роутер Zyxel.С ноута не могу зайти в яндекс.ни с одного браузера.с телефона заходит.пишет не найден IP сайта яндекс.подскажите куда лезть.


--------------------
Icq 459153467/ElectroStaticDischarge
Перейти в начало страницы
 
+Цитировать сообщение
 
Начать новую тему
Ответов (1 - 14)
max2812
сообщение 12.3.2018, 22:11
Сообщение #2


Постоянный посетитель

Возраст: 41
Группа: Пользователи 
Сообщений: 2 261
Регистрация: 25.10.2012
Из: Владимира
Пользователь №: 86 631
Вставить ник Цитата


А чо пишет? у меня время другое было, не синхронизировалось почему то, пройду синхронизацию, опа зашел в яндекс.
Перейти в начало страницы
 
+Цитировать сообщение
Finnegan
сообщение 12.3.2018, 22:21
Сообщение #3


Пресмертн. Проф. Патологич. Библиомансии

Возраст: 50
Группа: Пользователи 
Сообщений: 24 683
Регистрация: 13.1.2005
Из: Владимир
Пользователь №: 8 330
Вставить ник Цитата


В настройках роутера можно прописать днс яндекса, тогда уж точно будет открывать
Вот как раз инструкция настройки роутера Zyxel
https://dns.yandex.ru/router/zyxel/

Но, чтоб прочесть инструкцию, нужно, конечно, зайти сперва на яндекс:)


--------------------
На каждого, кто пляшет русалочьи пляски, есть Finnegan, который умеет ходить по воде.
Перейти в начало страницы
 
+Цитировать сообщение
kod-x
сообщение 12.3.2018, 22:43
Сообщение #4


Постоянный посетитель

Группа: Пользователи 
Сообщений: 3 861
Регистрация: 21.10.2005
Пользователь №: 10 769
Вставить ник Цитата


с яндексом на днях были проблемы
Перейти в начало страницы
 
+Цитировать сообщение
ESD
сообщение 12.3.2018, 22:43
Сообщение #5


Погнали наши...

Возраст: 39
Группа: Пользователи 
Сообщений: 1 055
Регистрация: 10.9.2012
Из: владимир city/dobroe
Пользователь №: 86 005
Вставить ник Цитата


Цитата(Finnegan @ 12.3.2018, 23:21) *
В настройках роутера можно прописать днс яндекса, тогда уж точно будет открывать
Вот как раз инструкция настройки роутера Zyxel
https://dns.yandex.ru/router/zyxel/

Но, чтоб прочесть инструкцию, нужно, конечно, зайти сперва на яндекс:)

по ссылке зашел.но дальше 2 пункта не хочет.не входит в систему


--------------------
Icq 459153467/ElectroStaticDischarge
Перейти в начало страницы
 
+Цитировать сообщение
@lex
сообщение 12.3.2018, 22:50
Сообщение #6


Постоянный посетитель

Возраст: 46
Группа: Пользователи 
Сообщений: 3 728
Регистрация: 20.3.2010
Из: Владимир
Пользователь №: 71 368
Вставить ник Цитата


Цитата(ESD @ 12.3.2018, 23:43) *
дальше 2 пункта не хочет.не входит в систему

Вспоминай/выясняй логин и пароль.
Перейти в начало страницы
 
+Цитировать сообщение
ESD
сообщение 12.3.2018, 23:01
Сообщение #7


Погнали наши...

Возраст: 39
Группа: Пользователи 
Сообщений: 1 055
Регистрация: 10.9.2012
Из: владимир city/dobroe
Пользователь №: 86 005
Вставить ник Цитата


что уже и на драйв не могу зайти и не на сид клуб форум.


--------------------
Icq 459153467/ElectroStaticDischarge
Перейти в начало страницы
 
+Цитировать сообщение
@lex
сообщение 12.3.2018, 23:11
Сообщение #8


Постоянный посетитель

Возраст: 46
Группа: Пользователи 
Сообщений: 3 728
Регистрация: 20.3.2010
Из: Владимир
Пользователь №: 71 368
Вставить ник Цитата


Цитата(ESD @ 13.3.2018, 0:01) *
что уже и на драйв не могу зайти и не на сид клуб форум.

Может в техподдержку позвонить?
Перейти в начало страницы
 
+Цитировать сообщение
ESD
сообщение 12.3.2018, 23:18
Сообщение #9


Погнали наши...

Возраст: 39
Группа: Пользователи 
Сообщений: 1 055
Регистрация: 10.9.2012
Из: владимир city/dobroe
Пользователь №: 86 005
Вставить ник Цитата


Завтра.

Телефон тоже через роутер работает.он заход и на драйв и на сид клуб.


--------------------
Icq 459153467/ElectroStaticDischarge
Перейти в начало страницы
 
+Цитировать сообщение
abm
сообщение 13.3.2018, 0:31
Сообщение #10


BLUE LIVES MATTER

Возраст: 60
Группа: Пользователи 
Сообщений: 32 415
Регистрация: 7.8.2001
Из: White Plains, NY
Пользователь №: 473
Вставить ник Цитата


Я бы грешил на вирус. Для начала проверил бы файлы hosts и lmhosts на наличие "левых" записей.
Т.е. тут явно проблема с ДНСом, но если он один, общий для ноута и смарта, - значит это сам ноут.
Теоретически, nslookup в зубы, но, похоже, у ТС-а квалификации не хватит этим грамотно воспользоваться.


--------------------
Если я попался Вам навстречу - значит Вам со мной не по пути. instagram.com/cmex13
Перейти в начало страницы
 
+Цитировать сообщение
Гость lost90_*
сообщение 13.3.2018, 9:29
Сообщение #11




Гости 



Цитата


ESD
Проверь что ли визуально файл hosts (на Win 7 64bit он расположен тут - c:\Windows\System32\drivers\etc\) для начала

Его содержимое по умолчанию дб таким, ничего другого там быть не должно:

Код
# Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host

# localhost name resolution is handled within DNS itself.
#    127.0.0.1       localhost
#    ::1             localhost


и lmhosts (расположен там же):

Код
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names.  Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
#      #PRE
#      #DOM:<domain>
#      #INCLUDE <filename>
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97     rhino         #PRE #DOM:networking  #net group's DC
# 102.54.94.102    "appname  \0x14"                    #special app server
# 102.54.94.123    popular            #PRE             #source server
# 102.54.94.117    localsrv           #PRE             #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.


Сообщение отредактировал lost90 - 13.3.2018, 9:33
Перейти в начало страницы
 
+Цитировать сообщение
abm
сообщение 13.3.2018, 15:49
Сообщение #12


BLUE LIVES MATTER

Возраст: 60
Группа: Пользователи 
Сообщений: 32 415
Регистрация: 7.8.2001
Из: White Plains, NY
Пользователь №: 473
Вставить ник Цитата


Цитата(lost90 @ 13.3.2018, 2:29) *
Проверь что ли визуально файл hosts (на Win 7 64bit он расположен тут - c:\Windows\System32\drivers\etc\) для начала
Я погорячился, давая совет проверить эти файлы. Судя по ошибке, "если повар нам не врет", у него имена не резольвятся в IP от слова "совсем". Если бы были записи в этих файлах, то IP таки был бы, но левый. А у ТС его вообще нет.

Еще одна потенциальная причина - у него каким-то образом на ноуте может быть запрещен или неправильно работает UDP протокол.
Или в файрволле напрочь запрещен трафик для DNSClient или-как-он-там-называется.




--------------------
Если я попался Вам навстречу - значит Вам со мной не по пути. instagram.com/cmex13
Перейти в начало страницы
 
+Цитировать сообщение
ESD
сообщение 13.3.2018, 16:24
Сообщение #13


Погнали наши...

Возраст: 39
Группа: Пользователи 
Сообщений: 1 055
Регистрация: 10.9.2012
Из: владимир city/dobroe
Пользователь №: 86 005
Вставить ник Цитата


# Copyright © 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.






а в host






# Copyright © 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost


--------------------
Icq 459153467/ElectroStaticDischarge
Перейти в начало страницы
 
+Цитировать сообщение
abm
сообщение 13.3.2018, 16:59
Сообщение #14


BLUE LIVES MATTER

Возраст: 60
Группа: Пользователи 
Сообщений: 32 415
Регистрация: 7.8.2001
Из: White Plains, NY
Пользователь №: 473
Вставить ник Цитата


ТС, проверь файрвол - не заблокирован ли UDP протокол вообще и DNSClient приложение в частности.
Ну и посмотри кто у тебя DNS server. Или покажи результат команды ipconfig /all


--------------------
Если я попался Вам навстречу - значит Вам со мной не по пути. instagram.com/cmex13
Перейти в начало страницы
 
+Цитировать сообщение
ESD
сообщение 13.3.2018, 17:40
Сообщение #15


Погнали наши...

Возраст: 39
Группа: Пользователи 
Сообщений: 1 055
Регистрация: 10.9.2012
Из: владимир city/dobroe
Пользователь №: 86 005
Вставить ник Цитата


Всем спасибо.прописал DNS.8.8.8.8. 8.8.4.4.
Все работает smile.gif


--------------------
Icq 459153467/ElectroStaticDischarge
Перейти в начало страницы
 
+Цитировать сообщение

  Ответить в данную темуНачать новую тему
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 




RSS       Политика конфиденциальности
Легкая версия